Operation Manual

MIDI Parameter Change Table
D15
MIDI Data Format
Data list
■ MIDI Parameter Change Table (DRUM SETUP)
[ MIDI (Silent) ] [ Internal Sequencer ]
Address
(H)
Size
(H)
Data
(H)
Parameter Description
XG Default
(H)
MIDI Reception MIDI Transmission Song Playback MIDI Recording
Song
Part
Piano
Playback
Channel
Panel
Operation
Song
Playback
MIDI
Input
PLAY
PLAY
(Piano
Part)
REW Piano Others
3n rr 00 1 00-7F PITCH COARSE -64…0…+63 40
× × × × × × × ×
01 1 00-7F PITCH FINE -64…0…+63 [cent] 40
× × × × × × × ×
02 1 00-7F LEVEL 0…127 Depends on the note
× × × × × × × ×
03 1 00-7F ALTERNATE GROUP OFF, 1…127 Depends on the note
× × × × × × × ×
04 1 00-7F PAN RND, L63…C…R63 Depends on the note
× × × × × × × ×
05 1 00-7F REVERB SEND 0…127 Depends on the note
× × × × × × × ×
06 1 00-7F CHORUS SEND 0…127 Depends on the note
× × × × × × × ×
07 1 00-7F VARIATION SEND 0…127 7F
× × × × × × × ×
08 1 00-01 KEY ASSIGN SINGLE, MULTI 00
× × × × × × × ×
09 1 00-01 Rcv NOTE OFF OFF, ON Depends on the note
× × × × × × × ×
0A 1 00-01 Rcv NOTE ON OFF, ON 01
× × × × × × × ×
0B 1 00-7F LOW PASS FILTER CUTOFF
FREQUENCY
-64…0…+63 40
× × × × × × × ×
0C 1 00-7F LOW PASS FILTER RESONANCE -64…0…+63 40
× × × × × × × ×
0D 1 00-7F EG ATTACK RATE -64…0…+63 40
× × × × × × × ×
0E 1 00-7F EG DECAY1 RATE -64…0…+63 40
× × × × × × × ×
0F 1 00-7F EG DECAY2 RATE -64…0…+63 40
× × × × × × × ×
TOTAL SIZE 10
20 1 00-7F EQ BASS GAIN -12…+12 [dB] 40
× × × × × × × × × ×
21 1 00-7F EQ TREBLE GAIN -12…+12 [dB] 40
× × × × × × × × × ×
22 1 NOT USED — — — — — — — — — —
×
23 1 NOT USED — — — — — — — — — —
×
24 1 04-28 EQ BASS FREQUENCY 32…2.0k [Hz] 0C
× × × × × × × × × ×
25 1 1C-3A EQ TREBLE FREQUENCY 500…16.0k [Hz] 36
× × × × × × × × × ×
26 1 NOT USED — — — — — — — — — —
×
27 1 NOT USED — — — — — — — — — —
×
28 1 NOT USED — — — — — — — — — —
×
29 1 NOT USED — — — — — — — — — —
×
2A 1 NOT USED — — — — — — — — — —
×
2B 1 NOT USED — — — — — — — — — —
×
2C 1 NOT USED — — — — — — — — — —
×
2D 1 NOT USED — — — — — — — — — —
×
TOTAL SIZE 0E
n: drum setup number (0-1)
rr: note number (0D-5B)
In the following cases, the unit will initialize all drum setups.
•XGSYSTEMONreceived
•GMSYSTEMONreceived
•GMLEVEL2SYSTEMONreceived
•GSRESETreceived
•DRUMSETUPRESETreceived(onlywheninXGmode)
When a part to which a drum setup is assigned receives a program change, the assigned drum setup will be initialized.
If the same drum setup is assigned to two or more parts, changes in drum setup parameters (including program changes) will apply to all parts to which it is assigned.