Operation Manual

3. Turn the key to “ ” and turn on
the electrical circuits to check if
the devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EAU23804
Replacing the headlight bulb
This model is equipped with a halo-
gen bulb headlight. If the headlight
bulb burns out, replace it as follows.
ECA10650
Take care not to damage the follo-
wing parts:
 Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it
free from oil, otherwise the
transparency of the glass, the
luminosity of the bulb, and the
bulb life will be adversely affec-
ted. Thoroughly clean off any
dirt and fingerprints on the
headlight bulb using a cloth
moistened with alcohol or thin-
ner.
 Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of
a wattage higher than speci-
fied.
1. Do not touch the glass part of the bulb.
1. Remove the headlight bulb cover,
and then disconnect the head-
light lead connectors.
1. Headlight bulb cover
2. Unhook the headlight bulb hol-
der, and then remove the burnt-
out bulb.
NOTICE
Specified fuse:
10.0 A
PERIODIC MAINTENANCE AND ADJUSTMENT
6-34
6
1HD-F819D-E0 7/3/11 20:27 Página 71
2AS-F819D-E0.indd 71 31/07/12 10:09