Service manual

REAR SHOCK ABSORBER REBOUND DAMPING
FORCE ADJUSTMENT
3-34
Spring length (installed) a:
Standard length
Extent of adjustment
137 mm (5.39 in)
133~142 mm
(5.24~5.59 in)
]
NOTE:
The length of the spring (installed) changes
1.5 mm (0.06 in) per turn of the adjuster.
CC
CAUTION:
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
4. Tighten:
• Locknut
T 20 Nm (2.0 mdkg, 14 ftdlb)
EC36N040
REAR SHOCK ABSORBER REBOUND
DAMPING FORCE ADJUSTMENT
1. Adjust:
• Rebound damping force
By turning the adjuster 1.
INSP
ADJ
Stiffer a ≥ Increase the rebound damp-
ing force. (Turn the adjuster
1 in.)
Softer b ≥ Decrease the rebound
damping force. (Turn the
adjuster 1 out.)
Extent of adjustment:
Maximum Minimum
Fully turned-in Fully turned-out
position position
]
• STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
20 clicks out
a