Service manual
BRAKE FLUID LEVEL INSPECTION/
SPROCKETS INSPECTION
3-22
EC367001
BRAKE FLUID LEVEL INSPECTION
1. Place the master cylinder so that its top is
in a horizontal position.
2. Inspect:
• Brake fluid level
Fluid at lower level ≥ Fill up.
a Lower level
A Front
B Rear
Recommended brake fluid:
DOT #4
0
W
• Use only designated quality brake fluid to
avoid poor brake performance.
• Refill with same type and brand of brake
fluid; mixing fluids could result in poor
brake performance.
• Be sure that water or other contaminants
do not enter master cylinder when refill-
ing.
• Clean up spilled fluid immediately to
avoid erosion of painted surfaces or plas-
tic parts.
EC368011
SPROCKETS INSPECTION
1. Inspect:
• Sprocket teeth a
Excessive wear ≥ Replace.
NOTE:
Replace the drive, driven sprockets and drive
chain as a set.
2. Inspect:
• Sprocket damper 1
Wear/Damage ≥ Replace.
INSP
ADJ