Service manual

ManualsBrandsYamaha ManualsMotorcyclesTZ250N1/(N)

HANDLEBAR

5-44

11.Install:

• Main switch 1

• Main switch holder 2

• Screw (main switch holder) 3

T

2 Nm (0.2 mdkg, 1.4 ftdlb)

• Clutch lever holder 4

• Bolt (clutch lever holder) 5

T

5 Nm (0.5 mdkg, 3.6 ftdlb)

NOTE:

The main switch and clutch lever holder

should be installed according to the dimen-

sions shown.

12.Install:

• Clutch cable 1

NOTE:

Apply the lithium soap base grease on the

clutch cable end.

13.Install:

• Handle crown 1

Refer to “STEERING” section.

14.Adjust:

• Handlebar position a

Handlebar position:

9 mm (0.35 in)

a

CHAS