Service manual

FRONT BRAKE AND REAR BRAKE
5-19
2. Install:
• Caliper 1
• Bolt (caliper) 2
T 23 Nm (2.3 mdkg, 17 ftdlb)
3. Tighten:
• Pad pin 3
T 18 Nm (1.8 mdkg, 13 ftdlb)
EC5A5230
Master cylinder kit
1. Clean:
• Master cylinder
• Master cylinder kit
Clean them with brake fluid.
2. Install:
• Master cylinder cup (primary) 1
• Master cylinder cup (secondary) 2
To master cylinder piston 3.
NOTE:
Apply the brake fluid on the master cylinder
cup.
W
After installing, cylinder cup should be
installed as shown direction. Wrong instal-
lation cause improper brake performance.
A Front
B Rear
CHAS
3. Install:
• Spring 1
To master cylinder piston 2.
NOTE:
Install the spring at the smaller dia. side.
A Front
B Rear