Operation Manual

FRONT FORK
5-29
3. Remove:
• Cap bolt 1
NOTE:
• While pressing down the spacer 3 with the
fork spring compressor 2, set the rod holder
5 between the locknut 4 and spacer.
• Hold the locknut and remove the cap bolt by
turning the spring preload adjuster 6.
Fork spring compressor:
YM-1441/90890-01441
Rod holder:
YM-1434/90890-01434
C
EC553212
Oil seal
1. Remove:
• Inner tube 1
Pull out the inner tube from the outer tube
2.
2. Remove:
• Stopper ring 1
Using slotted-head screwdriver.
3. Remove:
• Oil seal 1
• Oil seal washer
Using slotted-head screwdriver.
CC
CAUTION:
• Take care not to scratch the outer tube
inner surface.
• Replace the oil seal whenever removed.
CHAS