Operation Manual

CLUTCH
4-34
EC484500
Friction plate
1. Measure:
• Friction plate thickness
Out of specification ≥ Replace friction
plate as a set.
Measure at all four points.
Friction plate thickness:
Standard <Limit>
2.9~3.1 mm 2.7 mm
(0.114~0.122 in) (0.106 in)
]
EC484600
Clutch plate
1. Measure:
• Clutch plate warpage
Out of specification ≥ Replace clutch
plate as a set.
Use a surface plate 1 and thickness
gauge 2.
Warp limit:
0.1 mm (0.004 in)
a
ENG
EC4A4301
Push rod
1. Inspect:
• Push rod 1
• Ball 2
Wear/Damage/Bend ≥ Replace.
Bending limit:
0.2 mm (0.008 in)
a
NOTE:
The bending value is shown by one half of the
dial gauge reading.