Operation Manual
CARBURETOR AND REED VALVE
4-10
EC466010
HANDLING NOTE
CC
CAUTION:
Do not disassemble the venturi block 1
because it will cause a drop in carburetor
performance.
EC463000
REMOVAL POINTS
EC463110
Throttle valve
1. Remove:
• Throttle valve 1
• Ring 2
• Spring (throttle valve) 3
• Mixing chamber top 4
• Throttle cable 5
NOTE:
While compressing the spring (throttle valve),
disconnect the throttle cable.
ENG
EC464000
INSPECTION
EC464120
Carburetor
1. Inspect:
• Carburetor body
Contamination ≥ Clean.
NOTE:
• Use a petroleum based solvent for cleaning.
Blow out all passages and jets with com-
pressed air.
• Never use a wire.
2. Inspect:
• Main jet 1
• Main nozzle 2
• Pilot jet 3
• Power jet 4
Contamination ≥ Clean.
NOTE:
• Use a petroleum based solvent for cleaning.
Blow out all passages and jets with com-
pressed air.
• Never use a wire.