Owner`s manual

PRE-OPERATION CHECKS
4-3
2
3
4
5
6
7
8
9
Control cables
● Make sure that operation is smooth.
● Lubricate if necessary.
6-23
Drive chain
● Check chain slack.
● Adjust if necessary.
● Check chain condition.
● Lubricate if necessary.
6-21, 6-23
Wheels and tires
● Check for damage.
● Check tire condition and tread depth.
● Check air pressure.
● Correct if necessary.
6-15, 6-17
Brake and shift pedals
●
Make sure that operation is smooth.
●
Lubricate pedal pivoting points if necessary.
6-24
Brake and clutch levers
●
Make sure that operation is smooth.
●
Lubricate lever pivoting points if necessary.
6-24
Sidestand
●
Make sure that operation is smooth.
●
Lubricate pivot if necessary.
6-25
Chassis fasteners
●
Make sure that all nuts, bolts and screws are properly tightened.
●
Tighten if necessary.
—
Instruments, lights, signals
and switches
●
Check operation.
●
Correct if necessary.
—
Engine stop switch
●
Check operation. 3-1
ITEM CHECKS PAGE