Service manual

3-10
INSP
ADJ
ENGINE OIL REPLACEMENT
5. Install:
• Dipstick
6. Start the engine and let it warm up for several
minutes.
7. Turn off the engine and inspect the oil level
once again.
Wait a few minutes until the oil settles before
inspecting the oil level.
ENGINE OIL REPLACEMENT
1. Start the engine and warm it up for several
minutes and wait for five minute.
2. Place the machine on a level place and hold
it on upright position by placing the suitable
stand under the engine.
3. Place a suitable container under the engine.
4. Remove:
• Oil drain bolt 1
• Dipstick 2
Drain the engine oil.
5. Install:
• Copper washer
• Oil drain bolt 1
6. Fill:
• Engine oil
New
20 Nm (2.0 m · kg, 14 ft · lb)
7. Check:
• Oil leakage
8. Check:
• Engine oil level
9. Install:
• Dipstick 2
Oil capacity:
Periodic oil change:
1.0 L (0.88 Imp qt, 1.06 US qt)
TIP