Service manual

2-22

SPEC

MAINTENANCE SPECIFICATIONS

TIP

Î - marked portion shall be checked for torque tightening after break-in or before each ride.

Bead stopper M8 × 1.25 1 3 0.3 2.2

Driven sprocket (nut) M10 × 1.25 4 43 4.3 31

Driven sprocket (stud) M10 × 1.25 4 30 3.0 22

Sidestand mounting (nut) M10 × 1.25 1 44 4.4 32

Engine mounting:

Engine bracket (front) and frame M8 × 1.25 2 40 4.0 29

Engine bracket (front) and engine M8 × 1.25 2 40 4.0 29

Engine bracket (upper) and frame M8 × 1.25 2 40 4.0 29

Engine bracket (upper) and cylinder head M8 × 1.25 1 40 4.0 29

Engine and frame (rear) M8 × 1.25 2 40 4.0 29

Pivot shaft and nut M12 × 1.25 1 53 5.3 38

Relay arm and swingarm M12 × 1.25 1 53 5.3 38

Relay arm and connecting arm M10 × 1.25 1 35 3.5 25

Connecting arm and frame M10 × 1.25 1 35 3.5 25

Rear shock absorber assembly and frame M12 × 1.25 1 53 5.3 38

Rear shock absorber assembly and relay arm M10 × 1.25 1 35 3.5 25

Rear shock absorber and locknut (preload) M46 × 1.5 1 42 4.2 30

Drive chain tensioner (upper) M8 × 1.25 1 23 2.3 17

Drive chain tensioner (lower) M6 × 1.0 1 7 0.7 5.1

Drive chain support and swingarm M6 × 1.0 2 7 0.7 5.1

Drive chain guide and swingarm M6 × 1.0 2 7 0.7 5.1

Drive chain guard mounting M6 × 1.0 2 7 0.7 5.1

Fuel tank mounting M6 × 1.0 2 10 1.0 7.2

Fuel tank and fuel cock M6 × 1.0 2 7 0.7 5.1

Fuel tank and fuel tank bracket M6 × 1.0 4 7 0.7 5.1

Front fender mounting M6 × 1.0 4 7 0.7 5.1

Rear fender mounting M6 × 1.0 4 7 0.7 5.1

Flap guard mounting M6 × 1.0 2 4 0.4 2.9

Left side cover mounting M6 × 1.0 2 7 0.7 5.1

Seat mounting M6 × 1.0 2 7 0.7 5.1

Battery cover and battery box M6 × 1.0 1 5 0.5 3.6

Battery box and frame M6 × 1.0 2 7 0.7 5.1

Tightening torque

Part to be tightened Thread size Q'ty Nm m•kg ft•lb