Service manual
5-47
CHAS
1
2
1
HANDLEBAR
4. Install:
• Throttle grip assembly 1
• Throttle cable 2
On tube guide .
Apply the lithium soap base grease on the
throttle cable end and tube guide cable winding
portion.
2. Install:
• Handlebar grip (left) 1
Apply the adhesive to the handlebar 2.
Before applying the adhesive, wipe off grease
or oil on the handlebar surface a with a lacquer
thinner.
3. Install:
TT-R125E
• Collar 1
5. Install:
• Grip cap (lower) 1
• Grip cap (upper)
• Screw (grip cap)
• Cover (grip cap) 2
After tightening the screws, check that the
throttle grip 1 moves smoothly. If it does not,
retighten the bolts for adjustment.
4 Nm (0.4 m · kg, 2.9 ft · lb)
WARNING
TIP
TIP