Service manual
4-55
ENG
3
1
2
2
4
a
b
5
1
2
E
b
a
c
KICK AXLE AND SHIFT SHAFT
3. Install:
• Kick axle assembly 1
• Apply the engine oil on the kick axle.
• Slide the kick axle assembly into the
crankcase, make sure the clip 2 and kick
axle stopper b fit into their home positions
a, c.
Shift shaft
1. Install:
• Shift shaft 1
• Apply the lithium soap base grease on the oil
seal lip of the left crankcase side.
• Hook the spring ends onto the stopper 2.
Kick axle assembly
1. Install:
• Ratchet idle gear 1
• Kickstarter segment gear 3
• Plain washer 2
• Torsion spring 4
On kick axle 5.
Make sure the stopper a of the torsion spring
fits into the hole b on the kick axle.
2. Install:
• Spring guide 1
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on the
stopper of the torsion spring.
4. Hook:
• Torsion spring 1
Turn the torsion spring clockwise and hook into
the proper hole a in the crankcase.
TIP
TIP
TIP
TIP
TIP