Owner’s Manual
Configuring playback settings for different playback sources (Option menu)
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
VOL.
Input Select
Front display
Option
Input Select
Tone Control
DSP/Surround
Volume Trim
Lipsync
Signal Info.
Audio In
Back
RETURN
TV screen
2
Use the cursor keys to select an item and press ENTER.
Note
To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Option menu items
Note
▪ Available items vary depending on the selected input source.
▪ Text in parentheses denotes indicators on the front display.
▪ Default settings are underlined.
▪ Depending on the region of purchase, some menu items for audio streaming services are also available.
For details, refer to each manual on the supplied CD-ROM.
Item Function Page
Input Select (Input Select)
Switches the input source. p.79
Tone Control (Tone Control)
Adjusts the level of high-frequency range and low-
frequency range individually.
p.79
DSP/Surround
(
DSP/
Surround)
Program (PRG)
Select the sound programs and stereo playback. p.50
Sur.Decode
(SrDec)
Select which surround decoder is used when
Sur.Decode
is selected as the program.
p.52
DSP Level
(DSP Level)
Adjusts the sound field effect level. p.79
Adaptive DRC
(
A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume
is adjusted.
p.79
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. p.80
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
Corrects volume differences between input sources. p.80
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume. p.80
ZoneB Trim
(ZB.Trim)
Corrects volume differences between Zone A/B. p.75
Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the “Setup”
menu.
p.80
Signal Info.
(Signal Info.)
Displays information about the video/audio signal. p.80
Audio In
(Audio In)
Combines the video jack of the selected input source
with an audio jack of others.
p.81
Video Out (Video Out)
Selects a video to be output with radio sounds. p.81
FM Mode (FM Mode)
Switches between “Stereo” and “Mono” for FM radio
reception.
p.54
En
78