User Manual
Table Of Contents
- CONTENTS
- ABOUT THIS USER GUIDE
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- Enabling/disabling the HDMI Control function
- Switching the HDMI audio output destination
- Enabling/disabling the Auto Power Standby function
- Enabling/disabling the Child Lock function
- Enabling/disabling the network standby function
- Enabling/disabling the Bluetooth function
- Enabling/disabling the wireless (Wi-Fi) function
- Setting the dynamic range compression level
- Updating the firmware of this product
- Setting the HDMI signal format
- Connecting a subwoofer manually
- Initializing the sound bar
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- Alexa does not respond when called
- The UPDATE indicator is flashing green
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: Network
- Network functions cannot be used
- The sound bar cannot be connected to the Internet via a wireless LAN router (access point)
- A wireless network cannot be not found
- Audio cannot be played with AirPlay
- The sound bar is not detected on an AirPlay-compatible device
- Streaming services cannot be played
- An audio file on the media server (NAS, etc.) cannot be played
- Unable to update the firmware via a network
- When a problem occurs: App
- How to minimize standby power consumption
- How to replace the remote control battery
- How to reset the sound bar
- SPECIFICATIONS
- APPENDIX
If audio is being output from both the TV speakers and the sound bar, mute the TV.
To temporarily mute the sound bar, press | (Mute) on the remote control. To unmute, press | (Mute) again
or press VOLUME (+/-).
While muted, the indicators will show the following.
Flash
Related links
(
“Surround playback”(p.47)
(
“Stereo playback”(p.48)
(
“Adjusting the volume of the subwoofer”(p.49)
(
“Playing back human voices clearly (CLEAR VOICE)”(p.50)
(
“Enjoying rich bass sound (BASS EXT)”(p.51)
(
“Listening to audio from a Bluetooth® device”(p.52)
(
“Playing music using Sound Bar Controller”(p.54)
(
“Listening to audio with AirPlay 2”(p.57)
44
PLAYBACK > Basic control during playback