user manual

4-71
ENG
STARTER CLUTCH
CAUTION:
EAS00352
CHECKING THE GENERATOR SHAFT
1. Check:
generator shaft
1
generator shaft splines
2
Damage/wear Replace the generator
shaft.
oil passages
3
Dirt/obstruction Wash the generator shaft
and then blow out the oil passages with com-
pressed air.
bearing
4
Rough movement Replace.
INSTALLING THE STARTER CLUTCH ROLL-
ER
1. Install:
circlip
1
starter clutch roller
2
starter clutch drive gear
3
Be sure to install the starter clutch roller to
the starter clutch drive gear so that the cir-
clip is outside.