User Manual
Table Of Contents
- Cover
- Introduction
- Setup workflow
- Example 1) Ballroom where the Room Combiner can be used
- Example 2) Remote conferencing system that also uses Speech Privacy
- Using the Device Configuration Wizard to create your device setup
- Configuring the settings on the MRX
- Making EXT. I/O settings
- Connecting the equipment
- Powering-on the MRX
- Powering-on the amp
- Specifying the computer’s TCP/IP address
- Sending the Speech Privacy environmental sound
- Taking MTX-MRX Editor online
- Verifying that the settings were applied
- Example 3) A paging system using the PGM1
- Using the Device Configuration Wizard to create your device setup
- Specifying the MRX configuration
- Making EXT. I/O settings
- Connecting the equipment
- Powering-on the PoE-equipped gigabit network switch
- Specifying the MCP1’s UNIT ID
- Power-on equipment other than amps and powered speakers
- Power-on amps and powered speakers
- Specifying the computer’s TCP/IP address
- Taking MTX-MRX Editor online
- Verifying that the settings were applied
- Q&A
- Uninstalling the software (Removing the application)
Introduction
MRX Setup Manual
4
Example 3) A paging system using the PGM1
This example envisions a paging system using the PGM1 installed in a space such as a fitness club, and using the
MCP1 to switch the background music.
Powered speakers such as the DBR15 are placed in spaces that require high volume.
This example assumes that you’re using the following equipment.
The number of speakers is not specified; choose amplifiers that are suitable for your speaker setup. You will also
need to provide the appropriate number of cables.
EXi8 ID=01
MRX7-D ID=02
XMV ID=30
BGM
Pool Spa Dress Room Rest Room
Rack Office
Cafe
DCP
ID=00
DCP
ID=05
DCP
ID=06
DCP
ID=02
Studio A Studio B Spin Weight Cardio Child-minding
PGM1
ID=60
WXC-50
MCP1
ID=90
WXC-50
MCP1
ID=91
WXC-50
MCP1
ID=92
DCP
ID=03
DCP
ID=01
DCP
ID=04
Reception
•MRX7-D × 1
• EXi8 × 1
• XMV8280-D × 1
• DCP1V4S × 7
• MCP1 × 3
• PGM1 × 1
• PGX1 × 1
• PoE-compatible gigabit network switch
such as the SWR2100P-5G × 1
• WXC-50 × 3
• Powered speakers such as the DBR15 × 6
• XLR (male) output jacks × 6
(for powered speakers)
• Speakers (the required number)
• SD memory card × 1
• Background music sources such as a Blu-
ray player × 3
• Wireless mic receivers (for three channels)
• Headset mics for wireless use × 3