User Manual

Toolbar
Reference Manual
TF Series
- 32 -
PREFERENCE screen
Allows you to configure general operating settings regarding confirmation message display,
[SEL] key behavior, etc.
1 Confirmation
Allows you to turn confirmation messages for store, recall, and patching operations.
Store, Recall: When turned on, a confirmation message will be
displayed when you perform the corresponding
operation.
INPUT Select/OUTPUT Patch: When turned on, a confirmation message will be
displayed when you change input source or OMNI OUT
patching settings.
2 Auto Channel Select
When turned on, a channel of the corresponding type will be selected automatically
when you operate that channel's fader.
You can turn this feature on and off independently for input channels and output
channels.
[CUE] > [SEL] LINK : When turned on, a channel will be selected when you turn its CUE on.
3 Memorize [SEL] Position for Each FADER BANK
Determines whether channel positions are remembered in fader banks.
4 Touch Sensing Area Optimization
Allows you to optimize the touchscreen's sensitivity.
Sit: Optimized for operating the touchscreen when you are positioned below it, such
as when sitting.
Stand: Optimized for operating the touchscreen when you are positioned above it, such
as when standing.
5 Show Help at Startup
Determines whether the HELP screen is displayed automatically after the console starts
up.
6 Help Language
Determines the language used when displaying the HELP screen.
ձղ
ճ
մյ
ն
Configuring settings in the PREFERENCE screen
1. Use the buttons on the PREFERENCE screen to configure the settings as desired.
2. When finished, touch the close button ([X]).