User Manual

Toolbar

Reference Manual

TF Series

METER screen

Displays the input and output level of all the channels, and allows you to select the metering

point (i.e., the point at which the level is detected).

1 Input metering point selection menu

Select the input level metering point from the menu.

PRE HPF: After the head amp; before the HPF

PRE FADER: Before the fader

POST ON: After the [ON] key

2 Output metering point selection menu

Select the output level metering point from the menu.

PRE EQ: Before the EQ

PRE FADER: Before the fader

POST ON: After the [ON] key

3 Peak Hold button

Turn this button on to hold the peak level for each level meter. Turn this button off to

remove the peak level that was being held. The Peak Hold on/off setting affects both

input and output channels.

4 Meters

Display the input and output levels of the channels.

5 Meter display selection button

Allows you to select how many meters are displayed. Three display modes are available.

NOTE

You can assign the Peak Hold button to a [USER DEFINED KEY]. (page 26)

ձղճ