Service manual

SPEC

Insert the fuel tank return hose until its end con-

tacts the component.

To assemble to the carburetor joint 1, it is allowed

to apply the engine oil.

Attach the hose clamp in this direction.

This part works as a stopper against drop-off.

Fuel piping connector attachment directions.

1. Insert the connector until the click sound is heard

and check that the connector does not come off.

Care should be taken so that the foreign matter is

not caught. (It is prohibited to wear cotton work

gloves during the operation.)

Always use hands to connect/disconnect the con-

nector without using tools.

2. After the procedure item 1 as above is finished,

insert the clamp of the fuel pump side from the

lower side of the engine and check that the ,

and parts are completely equipped.

3. After the procedure item 1 as above is finished, lay

over the part of the injector side clamp from the

engine left side and insert the part from the

engine upper side while turning.

Check that the and parts are completely

equipped.

CABLE ROUTING