Service manual

GEN
INFO
2
CO ADJUSTMENT MODE
Cylinder identification
For #1 For #2
CO data
Example:
lean rich
–128 0 128
DIAGNOSTIC MONITORING MODE
Diagnostic monitoring code
Example: code “01”
Monitoring data
WHEN THE COMMUNICATION ERROR
OCCURRED BETWEEN ECU AND METER:
Error code
Example: When the error code is “Er-1”
For details of error codes, refer to
“FAIL-SAFE ACTION TABLE” in chapter 7.
(Manual No.: 5PS1-AE1)
FEATURES
CAUTION:
If the display shown in the illustration to
the left appears, the multi-function display
is malfunctioning. Replace the meter
assembly.
CAUTION:
If the fuel meter does not display the fuel
level, but repeatedly flashes as shown in
the illustration, the fuel level monitoring
system is malfunctioning. Check the fuel
sender and the electrical circuit.