Service manual

7-37
FRONT FORK
CHAS
WARNING
CAUTION:
INSPECTION
1. Inspect:
Inner fork tube
1
Outer fork tube
2
Scratches/Bends/Damage Replace.
Do not attempt to straighten a bent inner fork
tube as this may dangerously weaken the
tube.
2. Measure:
Fork spring free length
a
Over specified limit Replace.
Fork spring free length (limit):
500 mm
3. Inspect:
Cap bolt
Bend/Damage Replace.
ASSEMBLY
1. Install:
Damper rod
Allow the damper rod to slide slowly down the
inner tube until it protrudes from the bottom,
being careful not to damage the inner tube.