Owner`s manual

318
Reference section
HOME screen
IN/Rtn/MONI page
Monitor the input level of each channel
Function
This page displays the input level of
input channels 1–8, return channels 1/
2, and monitor channels 1–16.
Key operation
• [HOME] key → [F1] (IN/Rtn/MONI)
key
• Repeatedly press the [HOME] key
until the screen shown at the right
appears.
Screen functions
A Level meters
This area indicates the input level of each channel.
Below each level meter, the location of the fader
for that channel is displayed in dB units.
B PRE EQ button
C POST EQ button
D POST FADER button
Use these three buttons to select the location
within the signal routing that will be displayed by
the level meters (1). Turning on the PRE EQ but-
ton will display the pre-EQ signal level, the POST
EQ button will display the post-EQ signal level,
and the POST FADER button will display the post-
fader signal level. This is convenient when you
want to see the location at which the input signal
of that channel is clipping.
Tip!
The settings of buttons ( 2 )–( 4 ) also affect the input
meter display in the VIEW screen CH VIEW/Library
page.
E STEREO OUT LEVEL
This displays the position of the STEREO fader in
dB units.
■ Additional functions in the IN/Rtn/
MONI page
In the IN/Rtn/MONI page, holding down the [SHIFT]
key will assign the following additional function to
the [F1] key.
• [F1] (PEAK HOLD) key
Switches the Peak Hold function on/off. When
peak hold is on, a “” symbol indicating the
peak level will be maintained in the level meter
(1). The peak hold setting also affects the level
meters displayed in pages other than in the EQ/
ATT/GRP screen and the DYN/DLY screen.
2 3 4 5
1
ATT
4BAND EQ
DYNAMICS
etc.
PAN
LEVELON
PRE EQ
INPUT SELECT
METER
POST EQ
METER
POST FADER
METER