Owner`s manual

62 5. The Sequencer
● [F5]: “INS” = Rhythm Track Insert
This function is used to insert a new part at any point in an existing rhythm
track. Press [F5] to engage the rhythm track insert function after locating the
desired insert point via the main rhythm track edit screen, described above.
Then use [CS3] and [CS4] to specify the event to be inserted. The event types
that can be inserted and their parameters are exactly the same as those de-
scribed for the main rhythm track edit screen, above. Once the event to be
inserted has been specified, press [ENTER/YES] to begin the insert procedure.
“Are you sure?” will appear on the display. Press [ENTER/YES] again to
confirm that you want to go ahead with the insert operation, or press [EXIT/
NO] to cancel.
When the event has been inserted, “Completed!” will appear briefly on the
display, then the display will return to the main rhythm track edit mode.
● [F6]: “DEL” = Rhythm Track Delete
This function is used to delete a part from an existing rhythm track. Press
[F6] to engage the rhythm track delete function after locating the part to be
deleted via the main rhythm track edit screen, described above, the press [EN-
TER/YES]. Press [ENTER/YES] again to confirm that you want to go ahead
with the delete operation, or press [EXIT/NO] to cancel.
When the part has been deleted, “Completed!” will appear briefly on the
display, then the display will return to the main rhythm track edit mode.