User Manual

mls qos enable
mls qos dscp-queue 0 0
mls qos dscp-queue 1 0
mls qos dscp-queue 2 0
mls qos dscp-queue 3 0
mls qos dscp-queue 4 0
mls qos dscp-queue 5 0
mls qos dscp-queue 6 0
mls qos dscp-queue 7 0
mls qos dscp-queue 8 2
...
!
snmp-server community public ro interface vlan0.1
!
service http-server
http-server interface vlan0.1
!
service telnet-server
telnet-server interface vlan0.1
!
line con 0
line vty 0 7
!
end
SWP1#
4.2.6 Erase startup configuration
[Syntax]
erase startup-config
[Input mode]
priviledged EXEC mode
[Description]
Erases the startup settings (startup configuration).
[Note]
The startup configuration that is erased is determined by the unit's DIP switch #1 at the time that the unit is started.
[Example]
Erase the startup configuration.
SWP1#erase startup-config
erasing...[OK]
SWP1#
4.3 Manage boot information
4.3.1 Show boot information
[Syntax]
show boot [num]
show boot all
show boot list
[Keyword]
all : Shows up to five entries of the boot information history
list : Shows a simplified version of up to five entries of the boot information history
[Parameter]
num : <0-4>
Shows the boot history entry of the specified number (if this is omitted, boot history number 0
(current) is shown)
Command Reference | Maintenance and operation functions | 33