User Manual

Item Description
Aggregator LACP logical interface
ID Distinguishing ID on the LACP logical interface
Actor LAG The actor's own LACP system ID (priority, MAC address)
Admin Key
The ID that is the basis of the actor's own LACP key (logical
port number)
Status Link aggregation status ("Not ready"/"Ready")
Partner LAG The partner's LACP system ID (priority, MAC address)
Partner Key The ID that is the basis of the partner's LACP key
Link count
Number of ports currently conveying data / Number of ports
able to convey data
Link
List of the constituent LAN/SFP port (see table below for
details)
Link shows the following items.
Usage status Description
"Unselected" Currently communicating with LACP control protocol.
"Selected" Selected as a LAN/SFP port with LACP enabled.
"Standby" Specified as a standby LAN/SFP port with LACP enabled.
Synchronization flag Description
"no" Synchronization flag is not set.
"yes" Synchronization flag is set.
The state of the linked-up LAN/SFP ports is known from the usage status and the Synchronization flag.
Usage status Synchronization State of the linked-up LAN/SFP port
Unselected no
Currently communicating with LACP
control protocol.
Selected no
Selected as a LAN/SFP portt with LACP
enabled. Currently negotiating to
combine for link aggregation.
Standby no
Selected as a LAN/SFP port with LACP
enabled, and specified as a standby port.
Selected yes
Selected as a LAN/SFP port with LACP
enabled. Combined as link aggregation,
and data communication is possible.
[Example]
Show the status of the LACP logical interface.
SWP1#show etherchannel status summary
Aggregator po1
ID 1000000
Status Ready
Partner LAG 0x8000, 00-a0-de-11-11-11
Partner Key 0001
Link count 1/ 1
Aggregator po2
ID 1000001
Status Not ready
Partner LAG 0x8000, 00-a0-de-11-11-11
Partner Key 0001
Link count 0/ 1
104 | Command Reference |
LAN/SFP port control