Owner`s manual

7
[Explanation of Input/Output Section]
<On the Instrument>
q
Control Box Instrument Jack
This jack is used to receive power from the Control Box
and transmit the audio signal from the instrument to the
Control Box. Use the supplied cable to connect the in-
strument to the “Instrument Jack” on the Control Box.
* A commercially available audio cable with stereo mini plugs
on both ends can also be used. (Cables with resistors are
not compatible.)
* The system will not operate properly if a monaural cable is
used.
* The system will not operate properly if the cable is attached
to anything other than the Control Box.
* Pass the cable end through the holes on the supplied cable band then attach to the shoulder rest
as shown in the diagram on the right to prevent accidental disconnecting of the cable.
• Disconnecting the cable while the power is ON may result in damage to the equipment. The
sudden shock to your ears may be severe, so please use caution.
• When connecting or disconnecting the cable, always make sure that the control box is not
connected to any external device, or that the power is switched OFF on the external device
before proceeding. The resulting loud sound may cause hearing loss and damage external
equipment.
• When connecting or disconnecting the cable, always make sure there are no inner ear-
phones or headphones, etc., connected. The loud sound may cause hearing loss and dam-
age the inner earphones or headphones.
<On the Control Box>
w
Instrument Jack (
)
This jack supplies power to the SV250/SV255 instru-
ment and receives the audio signal from the SV250/
SV255. Use the supplied cable to connect the instru-
ment to the “Instrument Jack” on the Control Box.
* The control box’s main power is switched ON when a cable
is connected to this jack.
* Hooking the cable onto the cable hook positioned furthest
away from the instrument jack prevents accidental discon-
nection of the cable.
• Always disconnect the cable when the instrument is not in use. The instrument continu-
ously consumes electric power when the cable is connected.
• When connecting or disconnecting the cable, always make sure that the control box is not
connected to any external device, or that the power is switched OFF on the external device
before proceeding. The resulting loud sound may cause hearing loss and damage external
equipment.
• When connecting or disconnecting the cable, always make sure there are no inner ear-
phones or headphones, etc., connected. The loud sound may cause hearing loss and dam-
age the inner earphones or headphones.
• Never connect any devices (including other Silent Violins™ with different model numbers)
other than the SV250/SV255 Silent Violin™ that is included in the bundled set.
Doing so may result in damage to the other device.
Cable Band
Cable
Shoulder Rest Holder
Cable Hook
Cable
Caution
Caution
02_SV250_en.indd 7 10.5.10 11:23:36 AM