User Guide

20 Quick Start
Recording a Sample
Now try taking a sample of your own voice, and then playing it back by pressing the pad.
Z
Connect a microphone to the MIC INPUT jack. (See page 10.)
X
Switch memory protection off. (See page 51.)
C Switch off all pads, and then press the [REC] button to enter Sampling mode.
• You can escape from Sampling mode by pressing the [EXIT] button.
V Press the pad into which you want to record your new sample.
• If a sample is already recorded on the pad you select, the display asks whether to delete (over-
write) it. The message takes the form Delete B-1?, where the letter indicates the selected
bank (A, B, or C) and the number indicates the selected pad (1 to 8). Press [+1/YES] to delete
the existing sample and continue with recording, or press [-1/NO] to cancel and retain the
existing sample.
PHONES
MIC INPUT
REC
Which 
Pad?
NOTE
BANK
RESMPL REC
NORMAL
REVERSE
START
POINT
END
POIN
T
ONE SHOT
LOOP
GRADE
GATE
TRIGGER
STEREO/MONO
BANK BANK
LOOP TR
PLAY
Press 
Start
NOTE