User manual

C AMP
Selects the AMP anode. You must select the AMP anode to
control the main unit.
D VOLUME +/-
Increases or decreases the volume level.
E MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level.
IF STRAIGHT, ENT.*
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
G NIGHT
Turns on or off" the night listening modes (see page 29).
H SET MENU, SRCH MODE*
Activates the SET MENU function.
* Available only when the unit is in the XM Satellite Radio
mode (see page 39).
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
©
Handling the remote control
Do not spill water or other liquids on the remote
control.
Do not drop the remote control.
Do not leave or store the remote control in the
following types of conditions:
places of high humidity, such as near a bath
high temperature, such as near a heater or stove
extremely low temperatures
dusty places
7