User Manual

SHS-500 Owner’s Manual 15
% [LL] (Fast Reverse), [R/K] (Play/Pause), [RR] (Fast Forward)
When not connected to app: These are playback control buttons for the internal demo songs
(page 24).
When connected to app “Chord Tracker”: These are playback control buttons for the app to
play/pause a song in the smart device (page 29).
^ [JAM] button (page 29)
With each button press, this turns the Jam function on (indicator lights), selects the Jam mode in
order, and then turns off the Jam function (indicator goes off).
& [SUSTAIN] button
While holding down this button, the notes you play have a longer sustain.
* [PITCH] bend wheel
For adding smooth pitch variations to notes you play on the
keyboard. Roll the wheel upward to raise the pitch, or downward to
lower the pitch.
( [MODULATION] wheel
For applying a vibrato effect to notes played on the keyboard. Roll
the wheel upward to increase the effect depth, or downward to
minimize it. The [MODULATION] wheel can also be used to control the effect depth in the same
way as the [EFFECT CONTROL] knob ()), if you set it via the Function mode. For the operation,
see the NOTE at the bottom of page 22.
A [FUNCTION] button
Enter the Function mode (indicator lights). The Function mode enables you to set various settings
such as Tuning and MIDI channel selection. For details, refer to the online manual “Reference
Manual” described on page 10.
How to set: Press the [FUNCTION] button repeatedly to call up the desired Function menu in the
upper of the display, then rotate the [SELECT] knob (8) to select its value in the bottom of the
display.
To exit from the Function mode, press [EXIT] button (B) (indicator goes off).
NOTE
The last Function setting selected here is conveniently memorized when you exit the Function mode and
automatically recalled when you re-enter the mode.
B [EXIT] button
Exits from the Function mode.
(
*
Function name
Value