User Manual

SHS-300 Owner’s Manual 17

NOTICE

• Failure to set the battery type may shorten the life of the battery. Make sure to set the battery type

correctly.

• Connecting or disconnecting the USB cable with batteries installed may turn the power off, resulting in

loss of your custom settings data.

• When battery power becomes too low for proper operation, the volume may be reduced, the sound

may be distorted, and other problems may occur. When this happens, make sure to replace all

batteries with new ones or already recharged ones.

NOTE

• This instrument cannot be used to charge the batteries. Use only the specified charger device when

charging.

• Power will be automatically drawn from the USB cable if a USB cable is connected while batteries are

installed in the instrument.

Using a USB power adaptor or USB mobile battery (sold separately)

Connect the USB cable to a separately sold USB power adaptor or USB mobile battery in the order

shown in the illustration.

Follow the order shown above in reverse when disconnecting the USB cable.

CAUTION

• Before using a USB power adaptor or USB mobile battery, be sure to read the relevant precautions.

• Use only a USB power adaptor or USB mobile battery compatible with the USB standard for power

supply.

Output voltage 4.8 V to 5.2 V

Output current 1.0 A or greater

SHS-300

USB cable

USB power adaptor

USB mobile battery

AC outlet

*The shape of the plug differs depending on your area.