User Guide

Loading Impulse-Response Data 61
SREV1—Owner’s Manual
Loading Impulse-Response Data
This section explains how to load impulse-response data for each channel of the current
program from the Internal Card, PC Card, CD-ROM drive. Impulse response data
stored in the following formats can be loaded: TM4 or TMC. See “File Types” on page
9 for more information. In the impulse-response file list, a dotted box highlights the
selected file. The Protect icon ( ) appears to the right of write-protected files. In the
DRIVE section of the page, INTERNAL is the Internal Card, CD-ROM is the CD-ROM
drive, and PCMCIA is the PC Card.
The Data Load pages for each mode are shown below.
1 Use the [PARAMETER FINE] button to locate the Rev page.
2 Select the DATA LOAD button, and then press [ENTER].
The Data Load page appears.
3 Use the cursor buttons to select a drive button, and then press [ENTER] to
make it the active drive.
The impulse-response data stored on the active drive appear in the file list.
4 Use the DATA wheel or the [–1/DEC] and [+1/INC] buttons to select a file from
the list.
5 Use the cursor buttons to select the channel to which you want to load the
impulse-response data, and then press [ENTER].
A warning message appears. Select YES to load the selected file, or select NO to cancel
the operation.
The selected impulse-response data is loaded.
6 To return to the Rev page, select the BACK button, and then press [ENTER].
The Rev page appears.
2-ch mode 4-ch mode
2-ch x2 mode