User Guide

Using PC Cards 29
SREV1—Owner’s Manual
Using PC Cards
The SREV1 can store
programs, projects,
and
impulse-response
data on standard PC Cards (PCMCIA). The SREV1 supports the
PC Card ATA specification and the FAT16 file system, which is
also supported by Windows. Use PCMCIA flash ATA cards (Type
II) or CompactFlash cards with a PC Card adapter.
Inserting & Ejecting PC Cards
1 Insert the PC Card face up into the MEMORY CARD slot and push it in all the
way. (The eject button sticks out all the way when the card is fully inserted.)
The PC Card should be recognized and available for use in a few seconds.
Although rare, in some cases the PC Card may not be recognized. If this happens, try
reinserting the card. If it’s not recognized after several tries, contact your Yamaha dealer.
When a card is being written or read, the activity indicator lights up. Do not eject the
card, or turn off the power while this indicator is lit.
2 To eject a card, make sure that the activity indicator is not lit, and then press
the eject button.
The card ejects.
3 Remove the card from the slot.
When using a compact card with an adapter, pull the adapter to remove the card from
the slot. Pulling only the card may damage it.
The speed at which data can be written and read on a PC Card depends on its type.
Always store PC Cards in their cases.
PC ATA CARD
FLASH CARD
MEMORY CARD