User Manual

10.18. "Daylight Saving Time" dialog box
To open this dialog box, click [Daylight Saving Time] from the [System] menu on the menu bar.
This specifies the daylight saving time setting of the devices connected to the same network, regardless of their
online/offline state.
The target device is the MTX series.

For RM series units, use the “Clock” dialog box to make the settings.
•
Device List
Displays the current device status.
•
[Enable Daylight Saving Time] check box
Daylight saving time will be enabled if this check box is selected.

If the “Automatically adjust daylight saving time” check box is selected in the
computer’s “Date and Time” settings, you must also select the [Enable Daylight Saving
Time] check box in the “Daylight Saving Time” dialog box.
◦ Offset
Specifies the amount of time by which daylight saving time is earlier than standard time.
◦ Start time
Specifies the time when daylight saving time begins.
For example if you set Offset as 01:00 and Start time as 12:00, the clock will be set to 13:00 when
the time reaches 12:00 of the day on which daylight saving time begins.
◦ End time
10. Dialog boxes
92 | ProVisionaire Design User Guide