User Manual

18.3. Editor
Double clicking a device on the Project sheet will directly open the editor.
The Rio1608-D2 displays 16Ch, and the Rio3224-D2 displays 32Ch.
•
+48V ACTIVE
Displays whether the phantom function of the device is enabled or disabled.
•
[+48V] button
Switches the HA phantom power supply (+48 V) ON and OFF. When the device’s phantom function is
enabled, the ON for this button is enabled.
•
[PEAK HOLD] button
When this button is set to ON, the peak of each level meter is retained. When it is turned OFF, the retained
peaks are deleted.
•
[A.GAIN] knob
The HA analog gain can be adjusted.
•
[GC] indicator / gain value
The ON/OFF status of gain compensation for the R series (AD/DA) is displayed. When gain compensation
is ON, the gain value fixed by gain compensation is displayed.
•
[HPF] button
When this is turned ON (illuminated), a high-pass filter can be applied to the audio signal.
•
[Freq.] knob
The frequency band for high-pass filtering can be adjusted.
18.4. Context menu
When you right-click on a Ch space in the Editor, the following context menu will be displayed.
Menu Details
Identify The LCD display of the selected device’s main unit and the indicators
linked to the Ch flash simultaneously.
18. I/O Interface : Rio3224-D2 / Rio1608-D2
290 | ProVisionaire Design User Guide