User Manual
14.7.4. "GPI" dialog box
Click the [Tools] button on the device sheet and then click [GPI Input] or [GPI Output] to open this.
The use of the GPI functions is identical to the DME7, but the parameters that can be assigned with FUNCTION
are different.
■ [GPI Input]
"Settings" dialog box
For details of Input Type, refer to the DME7 GPI section.
Function
•
[No Assign]
This setting is used to not change any of the settings for the controller’s switches, knobs and sliders.
[DEVICE] and [PARAMETER1/2] will be unavailable.
•
[MTX ON]
The input voltage to the [GPI IN] connector will turn the parameter on/off.
Select one of the following parameter types, and then make the appropriate setting.
◦
Input Ch ON
◦
Fx RTN ON
◦
ZONE Out ON
◦
Output Ch ON
◦
Input Ch Mute Group
◦
ZONE Out Mute Group
For the Input Ch Mute Group and ZONE Out Mute Group, the LED on the main
unit turns off when the mute is ON.
◦ [Parameter1]
14. Audio Processors : MTX5-D/MTX3
194 | ProVisionaire Design User Guide