User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
49
Device Information
To access the “Device Information” dialog box, click the [View] menu [Device Information] command, or click
the [Show/Hide Device Information] shortcut button.
Regardless of the online status, this lists the status of the devices that are connected to the network within the
workspace. When a problem occurs or when performing system maintenance, this provides conveniently central-
ized management of the operating state of the devices.
• Amplifiers connected to the ACD1 are not shown.
[Reboot] check box
By selecting the desired check boxes and clicking the [Reboot] button, you can reboot multiple amplifiers in a
single operation. When you turn on a check box, the [Device] check box for the corresponding devices in the
“Firmware Update” dialog box (page 86) will also turn on.
[Device]
Indicates the name assigned to the device.
[Model]
Indicates the model name of the device (e.g., TX6n).
[ID]
Indicates the Device ID of the device.
[Serial No.] (TXn/XMV only)
Indicates the serial number of the device.
[Network Status]
Shows an icon to indicate the communication status of the device.
: Online state in which the device can be monitored and controlled
: Offline state, not synchronized with the device
NOTE