User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 8 Device Properties window
Amp Editor Owner’s Manual
134
w Power Limiter
These settings specify how the limiter will be controlled by the output power.
Check box
Turns the limiter on/off.
Threshold
Specifies the upper threshold value for the output power.
e Limiter Gain Reduction
Turns channel linking of the limiter on/off.
If this is “On,” the limiter of the other channel will also operate in tandem when the limiter is applied to one
of the channels.
r Output Voltage Calculator
Calculates the Threshold value in the Voltage Limiter area.
Output Power
Inputs the amplifier’s output power.
Load Impedance
Inputs the impedance of the speaker connected to each channel.
[=] button
Click this button to calculate the output voltage based on the values that are input to Power and Imped-
ance.
t [ APPLY] button
Click this button to specify the Output Voltage value in the Output Voltage Calculator for Threshold at the left
side of the button.
• In order to convert the available values for the TXn unit, the result of the calculation and the speci-
fied value may differ.
NOTE