User Manual

Chapter 6 Tree View window
Amp Editor Owner’s Manual
104
Tree structure
 Device
The devices registered in Amp Editor are shown as an icon and a name (label).
The icons will indicate the online status or alerts for the corresponding devices.
 ID
Indicates the Device ID of the device.
 Model
Indicates the model name of the device.
 Identify
When you click the [Identify] button, the button will light and the indicator or display on the corresponding
physical device will blink. When you perform the Identify operation on the physical device, the [Identify]
button corresponding to that device will light. The type of indication and the method of operation will depend
on the device, so refer to the owner’s manual for your particular device.
• No [Identify] button is available for amplifiers connected to the ACD1.
 Alert
The Alert symbol will appear when an alert event occurs on an amplifier. Even after the cause of the alert has
been addressed, the indication will not disappear until you click the Alert symbol.
 AMP ID
This indicates the ID of each amplifier connected to the ACD1.
 I/O Card
Indicates the I/O card connected to the device.
 Unmathced Device
Indicates devices that have the same Device ID, or that feature a MAC address that is different from the one
registered in Amp Editor.
Device icon Status
Does not exist on the network, or is not connected to the computer (Amp Editor).
Exists on the network, and is synchronized with Amp Editor (online status).
Exists on the network, but is not synchronized with Amp Editor (offline status).
Synchronized with Amp Editor (online status), and an alert has occurred.
I/O Card
Device
AMP ID
Unmatched Device
NOTE