User Manual

Yamaha Sound System Simulator Y-S
3
Owner’s Manual V3.1
32
5-1. Speaker Arrays
• Speaker array selection, on/off, changing names/deletion, saving/loading (Speaker List)
Speaker array selection
To display a speaker array, click a speaker array of a speaker name in Speaker List. The background of the array now
changes to yellow, indicating that it has been selected. Speaker Property displays all the parameters for the speaker.
The selected speaker arrays and array names are displayed in blue in Aspect View. You can also click speakers in
Aspect View to select them. Mirrored speakers placed using the “Auto layout” or symmetrical layout functions appear
in orange with an asterisk (*) beside their array names. You cannot select these speakers.
Speaker array on/off
Check the checkbox for a speaker array in Speaker List so that the checked speaker arrays are estimated in the
calculation. Speaker arrays for which checkboxes have been set to “on” appear in black in Aspect View. Speaker
arrays and array names for which checkboxes have been set to “off” appear in grey. However, the speakers you select
always appear in blue regardless of their “on/off” status, while speakers placed using the symmetrical layout function
will always appear in orange. Thus, you can always tell whether speakers are targeted for calculation by looking at
the checkboxes in the Speaker list. To reflect the speaker array checkbox settings in calculation results, click
.
Renaming and deleting the speaker array
To change the name of speaker arrays appearing in Speaker List, select a speaker array, right-click it, select [Rename]
from the menu that appears, and enter the new name. To delete the placed speaker array, select the speaker array
in Speaker List, then right-click and select [Delete] or select [Delete Array (D)] from the [Array (A)] menu.