User Manual

13.5. Tool buttons
Commands frequently used in DME7 are provided as buttons.
Button Command Summary
[Layer]
Switch between the Audio layer and Control layer.
Alternatively, you can do so by using the shortcut keys (Ctrl+page up).
[Control
Function]
Turn this button on to emulate the configuration in the Control layer.
While the button is turned on, you cannot modify the configuration.
[Compile] Analyzes whether there is any problem with the component placement
and wiring.
[Device
Mute]
Mutes the DME7.
[Tools]
[Remote Control Setup List]
Enables you to register parameters you wish to control from the remote
controller.
[SD Card File Manager]
Enables you to register files you wish to play on the SD Card component.
[GPI]
Using the GPI ins/outs enables you to remotely control the DME7 from a
custom-made controller or external device.
[MIDI]
You can remotely control the DME7 via MIDI.
[MCP1]
Opens the MCP1 editor that was placed on the Project sheet.
[Peak Hold]
Select “On” to hold the peak value on the meter for the component
placed in the sheet.
Select “Reset” to reset the peak hold.
[Protect User Defined Block]
Opens the "Protect User Defined Block" dialog box.
For details, refer to the "Protect User Defined Block."
[Layer Link]
Turn this command on to synchronize (link) the position of the audio
component placement between the Audio layer and Control layer.
13. Audio Processors: DME7
ProVisionaire Design V1.2 User Guide | 125