User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Advanced settings
CK88 CK61 Owner’s Manual
39
Control
Panel
Controller Mode
Sets the conditions for a controller position to be reflected when the controllers’ actual
position and values called up with the LIVE SET [1] to [8] buttons do not match.
• Jump: The position of a controller is reflected immediately when that controller is
moved.
• Catch: The current setting will be held until the controller’s position matches (catches)
values called up with the LIVE SET [1] to [8] buttons. Once the values have matched,
the controller’s position will be reflected.
Default:
Jump
Filter/EG Reset
Determines whether to reset (On) or maintain without resetting (Off) the EG and FILTER
parameters when a Voice for the Part has been changed.
Default:
On
Effect On/Off Reset
Determines whether to reset (On) or maintain without resetting (Off) the Effect
parameters when a Voice for the Part has been changed.
Default:
On
Keyboard Touch Curve
Determines how actual velocities will be generated according to the strength with
which you play notes on the keyboard.
• Normal: This linear “curve” produces one-to-one correspondence between the
strength of your keyboard playing (velocity) and the actual sound change.
• Soft: This curve provides an increased response, especially for lower velocities.
• Hard: This curve provides an overall decreased response, especially for higher
velocities, meaning that greater strength is needed to produce louder sound.
• Wide: This curve accentuates your playing strength by producing lower velocities in
response to softer playing and louder velocities in response to harder playing. As
such, you can use this setting to expand your dynamic range.
• Fixed: This setting produces the same amount of sound change, no matter what your
playing strength. The velocity of the notes you play is fixed at the value set here.
Default:
Normal
Fixed Velocity
When Touch Curve above is set to Fixed, this lets you set the desired fixed velocity,
letting you keep the same, regardless of how hard or soft you play the keyboard.
Settings:
1–127
Default: 64
Foot Pedal Pedal 1
Pedal 2
Pedal Type
Sets the type of pedal connected to the FOOT PEDAL [1] jack or the FOOT PEDAL [2]
jack. Select FC3A (HalfOn) when using a Half Damper pedal.
Settings:
FC3A (HalfOn), FC3A (HalfOff), FC4A/FC5, FC7
Default:
Pedal 1: FC3A (HalfOn)
Pedal 2: FC7
Live Set Inc/Dec
Sets the type of operation for using the pedals connected to the FOOT PEDAL [1] jack or
the FOOT PEDAL [2] jack.
• Off: Operates the control change assigned to the Live Set Sound.
• Live Set Inc: Selects the next Live Set Sound when operating the pedal.
• Live Set Dec: Select the previous Live Set Sound when operating the pedal.
Default:
Off
Function name Description