User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
CK88 CK61 Owner’s Manual
26
Editing Live Set Sound names
Select the desired Live Set Sound for which you wish to
edit the name [SETTINGS] button Name Edit
the name [ENTER] button Select Store.
NOTE
If “Do not store now” is selected, the Live Set Sound will not be
stored, but the edited name will be retained.
Operations during name edit
Use the Live Set Sound [1] and [2] buttons to move the
cursor to the position of the character you wish to edit.
Use the VALUE buttons and Encoder dial to select
characters, and then use other buttons as listed below
to edit the name.
Swapping or copying Live Set
Sounds
1. Call up the Live Set Sound you want to swap
from or copy from.
2. Use the [MENU] button Job Live Set
Manager Swap or Copy.
3. Use the Encoder dial to select the desired
Live Set Sound to swap to or to copy to.
4. Press the [ENTER] button.
When the operation is completed, the message
“Completed” appears on the screen, and then
operation returns to the Top screen.
Initializing a Live Set Sound
When initializing a Live Set Sound, only Part A is
enabled (set to ON), and the first Voice in the Piano
category will be selected. All settings for Filters, EG,
and effects will be reset to their initial values.
1. Call up the Live Set Sound you want to
initialize.
2. Select from the [MENU] button Job
Live Set Manager Initialize.
3. Use the Encoder dial to select Live Set Sound
Init.
4. Press the [ENTER] button.
When initialization is complete, the message
“Completed” appears on the screen, and then
operation returns to the Top screen.
NOTE
If you want to reset the Live Set Sound to the default settings,
simultaneously press the [EXIT] and [SETTINGS] buttons (page 42).
This operation does not overwrite the stored Live Set Sound.
Managing Live Set Sounds
Buttons Functions
LIVE SET [1] Moves the cursor to left.
LIVE SET [2] Moves the cursor to right.
LIVE SET [3] Inserts a highlighted character at the cursor
position.
LIVE SET [4] Deletes the character at the cursor position.
LIVE SET [5] Changes the highlighted character at the
cursor position to the desired one.
LIVE SET [7] Reverts all characters to the unedited
name.
LIVE SET [8] Deletes all characters.
[ENTER] Saves the name and ends editing.
[EXIT] Ends editing without saving the name.
Cursor
Character selected for entry