manual

Reference Manual
Reference
74
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Performance
Play
Mixing
Edit Select
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter / EG
EQ
Effect
Parameter
A/D Out
A/D FX
Parameter
Part Edit
Voice
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Filter / EG
3 Band EQ
Rcv Sw
FX Send
Job Select
Recall
Bulk
Copy
Initialize
Supplementary Info.
Basic Structure
Appendix
Chorus Send
Adjusts the chorus send level. The higher the value, the more pronounced the Chorus.
Settings: 0 – 127
Reverb Send
Adjusts the reverb send level. The higher the value, the more pronounced the Reverb.
Settings: 0 – 127
Split Sw (Split Switch)
Determines whether the settings of the Split Point and the Split Lower/Upper position in the Part parameter are enabled
(on) or disabled (off).
Settings: on, off
Split Point
Determines the note number of the Split point, which divides the keyboard into two different sections.
Settings: C -2 – G8
NOTE: When the Split Lower/Upper parameter of each Part is set to “both,” this parameter will have no effect.
NOTE: Sound is produced only when you play notes within the area that matches both the Split setting and Note Limit setting.
NOTE: You can also set the Note directly from the Keyboard, by holding down the [SHIFT] button and pressing the desired key.
Porta Sw (Portamento Common Switch)
Porta Part 1 Sw / Part 2 Sw / Part 3 Sw / Part 4 Sw
Determines whether Portamento is applied to the current Performance or not. You can determine the Portamento on/off
setting for each Part when the Portamento Common Switch is set to on. The Portamento Switch of each Part is not
available when the Portamento Common Switch is set to off (“---” is displayed at each Part Switch).
Settings: on, off
NOTE: This parameter is not available for the Drum Part.
Time Offset (Portamento Time Offset)
Determines the pitch transition time when Portamento is applied. You can adjust Portamento time for the Voice assigned
to each Part as offset. Higher values result in a longer pitch change time, or a slow speed.
Settings: -64 – +63
Determines whether the item being edited will commonly affect all five Arpeggios assigned to each Voice (“Arp Edit”), or
affect only the selected Arpeggio (“Arp 1 – 5 Type”).
Arp Common Sw (Arpeggio Common Switch)
Determines whether Arpeggio is on or off. You can also turn Arpeggio on/off from the front panel with the [ARP ON/OFF]
button.
Settings: off, on
Arp 1 – 5 Select (Arpeggio 1 – 5 Select)
Select one of “ARP1” – “ARP5.” The 8th note icon
shown in the settings indicates that one of the Arpeggio
Types (other than “off”) is selected for the Arpeggio.
When selecting “ARP SELECT” via the Arpeggio/Effect
Function button, you can select Arp 1 to 5 via the
Function buttons.
Settings: Arp 1 – Arp 5
3 Arpeggio
Arpeggio/Effect Function button
Function buttons