User Manual

Reference Manual
Reference
59
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Voice
Play
Normal Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Controller
LFO
Filter/EG
3 Band EQ
Effect
Element Edit
OSC
Tune
PEG
Filter Type
FEG
Filter Scale
AMP Level/Pan
AEG
AMP Scale
LFO
EQ
Drum Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Effect
Key Edit
OSC
Tune
Filter Type
AMP Level/Pan
AEG
EQ
Job
Recall
Bulk
Supplementary Info.
Basic Structure
Appendix
Same as the Effect in Normal Voice Common Edit (page 44). The main difference is that the Insertion Effect Out
parameter on the S90 XS/S70 XS Editor is set for each Drum Key. In addition to that, four parameters are available. In
this section, we'll describe only those parameters which are different from the Normal Voice.
Key Out (Drum Key Out)
Determines which Insertion Effect (A or B) is used to process each individual Drum Key. This Parameter can be set for
each Drum Key selected in the Key parameter.
Settings: thru (through), Ins A (Insertion A), Ins B (Insertion B)
Key
Determines the Drum Key to be edited. You can select the key by clicking the keyboard on the S90 XS/S70 XS Editor.
The parameters Key Out, Reverb Send (Key Reverb Send) and Chorus Send (Key Chorus Send) can be set for each
Drum Key.
Settings: C0 – C6
Chorus Send (Key Chorus Send)
Determines the level of the Drum Key sound (the bypassed signal) that is sent to Chorus effect. The setting here is
available only when the Key Out parameter is set to “thru.”
Settings: 0 – 127
Reverb Send (Key Reverb Send)
Determines the level of the Drum Key sound (the bypassed signal) that is sent to Reverb effect. The setting here is
available only when the Key Out parameter is set to “thru.”
Settings: 0 – 127
Chorus Ins Send (Insertion Chorus Send)
When the Key Out parameter is set to “Ins A” or “Ins B,” this determines the level of the Drum Key sound (output from
Insertion Effect A or B) that is sent to the Chorus effect.
Settings: 0 – 127
Reverb Ins Send (Insertion Reverb Send)
When the Key Out parameter is set to “Ins A” or “Ins B,” this determines the level of the Drum Key sound (output from
Insertion Effect A or B) that is sent to the Reverb effect.
Settings: 0 – 127
7 Effect