User Manual

Reference Manual
Reference
141
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Utility
Utility Select
General
Layer/Split/
Drum Assign
MIDI
Controller
Micro Tune
Voice Select
Arpeggio
A/D Out
A/D FX
Master FX
Master EQ
Remote
Quick Set
Panel Lock
Fctry Set
Basic Structure
Appendix
Output Select
Determines the output destination of the audio signal input from the MIC INPUT jack.
Settings: See below.
Chorus Send
Determines the Send level of the MIC INPUT signal sent to the Chorus effect. The higher the value, the more
pronounced the Chorus. This parameter can be changed directly via the Knob.
Settings: 0 – 127
Reverb Send
Determines the Send level of the MIC INPUT signal sent to the Reverb effect. The higher the value, the more
pronounced the Reverb. This parameter can be changed directly via the Knob.
Settings: 0 – 127
Dry Level
Determines the level of the MIC INPUT signal which has not been processed with the System Effects (Reverb, Chorus).
Settings: 0 – 127
NOTE: When the Output Select is set the value other than “L&R,” the Reverb/Chorus Send is automatically fixed to 0 and the Dry Level
is automatically fixed to 127.
From this display, you can set the Insertion Effect Types applied to the
Audio Input signal in the Performance mode. The display for setting the
Insertion Effect A/B parameters can be called up from this display.
Ins Connect Type (Insertion Connection Type)
Determines the effect routing for Insertion Effects A and B when the cursor
is located around the Ins A/B. The setting changes are shown on the
diagram in the display, giving you a clear picture of how the signal is
routed. The parameter name and value are shown at the top of the display.
Settings: ins A -> B, ins B -> A
Chorus Send
Determines the level sent to the Chorus Effect. The higher the value, the more pronounced the Chorus. This parameter
is same as Chorus Send in the Voice A/D Output display. This parameter can be changed directly via the Knob.
Settings: 0 – 127
Reverb Send
Determines the level sent to the Reverb Effect. The higher the value, the more pronounced the Reverb. This parameter
is same as Reverb Send in the Voice A/D Output display. This parameter can be changed directly via the Knob.
Settings: 0 – 127
Dry Level
Determines the level which has not been processed with the System Effects (Reverb, Chorus). This parameter is same
as Dry Level in the Voice A/D Output display.
Settings: 0 – 127
Display indication Output destination Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
vocoder Insertion Effect of the Voice ----
A/D FX (Voice A/D Effect)
ins A -> B Signals processed with Insertion Effect A will be sent to Insertion Effect B and signals processed with Insertion Effect B are sent to
Reverb and Chorus.
ins B -> A Signals processed with Insertion Effect B will be sent to Insertion Effect A and signals processed with Insertion Effect A are sent to
Reverb and Chorus.