User Manual

Reference Manual
Reference
135
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Utility
Utility Select
General
Layer/Split/
Drum Assign
MIDI
Controller
Micro Tune
Voice Select
Arpeggio
A/D Out
A/D FX
Master FX
Master EQ
Remote
Quick Set
Panel Lock
Fctry Set
Basic Structure
Appendix
Knob Curve
Adjusts the touch response sensitivity in five steps. Larger values provide higher sensitivity, letting you make large
changes to the actual value even with slight turning of the Knob.
Settings: 1 – 5
Slider Mode
Determines how the parameter value is affected when you operate the Slider.
Settings: catch, jump
Bank Wrap Around
When using the BANK [DEC]/[INC] buttons to change the Bank/Part of the Voice/Performance mode, this determines
whether pressing the cursor [right] button alternately moves continuously and changes from the last Bank/Part to the
first Bank/Part and vice versa (last to first). When this parameter is set to “on,” continuous change is available.
Settings: off, on
Auto Load
Determines whether the Auto Load function is on or off. When this is on, the instrument will automatically load the
specified files (from the USB storage device or internal flash memory) to User memory—whenever the power is turned
on. The file to be loaded is shown on this display. The Auto Load file will be specified in the File Load display called up
via the [ENTER] button.
Settings: off, on
Power on Mode
This determines the default power-on mode (and memory bank)—letting you select which condition is automatically
called up when you turn the power on.
Settings: performance, voice (USER1), voice (PRE1), voice (GM), master, multi
NOTE: Make sure to store the Utility settings to the internal memory by pressing the [STORE] button before turning the power off.
Please keep in mind that the Utility settings will be lost if you turn off the power without executing the Store operation.
LCD Mode
Switches the backlight of the LCD.
Settings: normal, reverse
Click Sw (Click Switch)
Switches the click (metronome) sound on/off. This parameter can be set also by holding the [SHIFT] button and
pressing the [START/STOP] button.
Settings: off, on
Click Beat
Determines the time signature of the click (metronome). The accent is applied to the first beat of the time signature set
here. The time signature of the Standard MIDI file selected in the Sequence Play mode overrides the value set here.
Settings: 1/4 – 16/4, 1/8 – 16/8, 1/16 – 16/16
catch The Slider operation will not affect the value immediately while it will affect the value after the Slider position reaches the position
corresponding to the current value.
jump The Slider operation will change the value immediately from the current value to the new value corresponding to the Slider position.
performance When turning the power on next time, the Performance mode is entered and the first program number (USR: 001) is selected
automatically.
voice
(USER1)
When turning the power on next time, the Voice mode is entered and the first program number of the User Voices (USR1: 001) is
selected automatically.
voice (PRE1) When turning the power on, the Voice mode is entered and the first program number of the Preset Voices (PRE1: 001) is selected
automatically.
voice (GM) When turning the power on next time, the Voice mode is entered and the first program number of the Preset Voices (GM: 001) is
selected automatically.
master When turning the power on next time, the Master mode is entered and the first program number (001) is selected automatically.
multi When turning the power on next time, the Multi mode is entered and the first program number (001) is selected automatically.