User Manual

ManualsBrandsYamaha ManualsElectronic KeyboardS70 XS

Reference Manual

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Performance

Play

Mixing

Edit Select

Common Edit

Name

Play Mode

Arpeggio

Controller

Filter / EG

Effect

Parameter

A/D Out

A/D FX

Parameter

Part Edit

Voice

Play Mode

Arpeggio

Arp Edit

Arp 1-5 Type

Filter / EG

3 Band EQ

Rcv Sw

FX Send

Job Select

Recall

Bulk

Copy

Initialize

Supplementary Info.

Basic Structure

Appendix

Performance Job

The Performance Job mode features some convenient data organization and initialization tools, for use when creating

Performances and archiving them.

If you are editing a Performance but you have not stored it before switching to another Performance, the edits you have

made will be cleared. If this happens, you can use the Recall function to restore the Performance with your latest edits

intact. Press the [ENTER] button to execute the Recall.

This function lets you send your edited parameter settings for the currently selected Performance to a computer or

another MIDI device for data archiving. Press the [ENTER] button to execute the Bulk Dump.

NOTE:

You can execute this function by holding down the [SHIFT] button and pressing the [PERFORM] button.

NOTE: In order to execute Bulk Dump, you will need to set the correct MIDI Device Number. For information on the MIDI Device

Number setting, refer to page 137.

Part

This convenient operation lets you copy Common Edit and Part Edit settings

of a certain Performance to the currently edited Performance. This is useful

if you are creating a Performance and wish to use some parameter settings

of another Performance.

NOTE:

When this display is shown, you can hear the original sound at copy source

by pressing the [EDIT] button to call up the Compare mode. Pressing the

[EDIT] button again will exit from the Compare mode.

1 Source Performance

Determines the Bank and the Performance number to be copied. When “current” is selected, the current Performance is specified as

Source Performance. Accordingly, you can copy the parameter settings from a Part to a different Part of the same Performance.

Settings: Bank: USR1 – 4, ---

Performance number: 001(A01) – 128 (H16), current

NOTE: You can select the Performance by pressing the [CATEGORY SEARCH] button when the cursor is at Source Performance.

2 Data type of the source

Determines the source data type including the Part number. According to the setting here, the Data type of the destination will be

automatically set to the appropriate item.

Settings: common, part 1 – 4, A/D

3 Data type of the destination

Determines the destination data type including the Part number. According to the setting here, the Data type of the source will be

automatically set to the appropriate item.

Settings: common, part 1 – 4, A/D

Operation

[PERFORM]  Select Performance  [JOB]  Performance Job Select display

1 Recall

2 Bulk (Bulk Dump)

3 Copy