User Manual

Reference Manual
Basic Structure
15
Basic Structure
Functional Blocks
Tone Generator
A/D Input
Arpeggio
Sequencer
Audio Record/Play
Controller
Effect
Internal Memory
Reference
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Appendix
About MIDI
Display Messages
Troubleshooting
Effect Connection in Each Mode
1 Element EQ applied to each Element (for a Normal
Voice) and each Key (for a Drum Voice)
Can be set in the EQ section (pages 57 and 62) of the Voice Element
Edit/Voice Key Edit on the S90 XS/S70 XS Editor.
2 Common EQ applied to all the Elements and Drum
Keys
Can be set in the 3 Band EQ display (page 44) of Voice Edit.
3 Selection which Insertion Effect, A or B is applied to
each Element/Key
Can be set in the Effect display (page 44) of the Voice Edit on the S90
XS/S70 XS Editor.
4 Insertion Effect A/B related parameters
Can be set in the Effect Parameter display (page 45) for “Ins A” and “Ins
B” of Voice Edit.
5 Reverb and Chorus related parameters
Can be set in the Effect Parameter display (page 45) for “Reverb” and
“Chorus” of Voice Edit.
6 Master Effect related parameters
Can be set in the Voice Master FX display (page 142) of the Utility mode.
7 Master EQ related parameters
Can be set in the Voice Master EQ display (page 143) of the Utility mode.
NOTE Regarding the Audio Input signal from the MIC INPUT jack in the
Voice mode, when the “Output Select” parameter (page 141) is set
to something other than “L&R,” the signal can be applied at only 3 –
4 settings as shown above and output.
1 Part EQ applied to each Part
Can be set in the 3 Band EQ display (page 88) of Performance Part Edit.
2 Selection to which Parts the Insertion Effect is
applied
Can be set in the Fx Send display (page 89) of Performance Edit.
3 Reverb and Chorus related parameters
Can be set in the Effect Parameter display (page 77) for “Reverb” and
“Chorus” of Performance Common Edit and the Fx Send display (page
89) of Performance Part Edit.
4 Master Effect related parameters
Can be set in the Effect Parameter display (page 77) for “Master” of
Performance Common Edit Effect Select.
5 Master EQ related parameters
Can be set in the EQ display (page 76) of Performance Common Edit.
NOTE The Effect settings of 1, 3, and 4 in the Voice mode are available
for up to eight parts for which the Insertion Effect is turned on.
NOTE The audio signals of the parts for which the “Output Select”
parameter (page 78)is set to something other than “L&R” can be
applied only at the 1 and 2 settings as shown above and output.
In the Voice mode
In the Performance mode
Element 1 – 8
Drum Key C0 – C6
Voice
Element or Key
Element EQ
Common EQ
Insertion A
Insertion B
Send Level
Chorus
Reverb
Chorus
To R eve r b
Return Level
Master
Effect
Master EQ
Voice
Part EQ
Insertion A/B
Part 1 – 4
Master
Effect
Master EQ
Reverb
Chorus
Send Level
Chorus
To R eve r b
Return Level
Performance